old Packard Bell Microsoft Interview Question

Gregory Alan Bolcer gbolcer@endeavors.com
Sun, 19 Jan 2003 12:59:21 -0800

If you have an old Packard Bell machine
with a motherboard that only supports a 75mhz,
90mhz, or 100mhz chip, but you upgrade the bios
so that it can support a 133mhz pentium and the
only other chip you have besides the original
75mhz is a 200mhz,

What bus speed should I run it at in order
to get the least amount of wait states and
best performance?  50, 60, or 66?